Agriculture H-walls
AGRI H-WALLS FOR PRESERVING CORN AND GRASS
AGRI H-RETAINING WALLS UP TO 15 TON AXLE LOAD
H-WALLS AS PARTITION WALLS BETWEEN TWO CLAMPS - DOUBLE RETAINING
We have introduced new silo walls to the market for the construction of trench silos, specifically two H-Walls: CUAGRIZH 316X250 CM and CUAGRIZH 423X250 CM. These H-Walls allow for a very simple and quick construction of clamps. This is a freestanding wall with a circulation path that does not need to be filled with soil or sand.
Features:
- A groove-groove connection
- Easy to cover your clamp
- Practical for dividing existing silos
- Concrete quality C60/75
- No need to fill the elements with soil or sand
- A concrete corridor is provided at the top, 1meter from the edge
To install the wall, the following lifting hooks are required:
- 4 x KKA 5T
- 4 x HBS RD24
- Lifting beam
The wall can withstand an axle load of up to 15 tons with a border distance of 0 cm.
Stair are on request.
H-WALLS FREESTANDING UP TO 15 TON AXLE LOAD
Axle load
The axle load is calculated by dividing the mass of the compactor by the number of axles (so usually by 2). At CBS Beton, all walls are calculated with an edge clearance of 0 cm so that you can drive over the full width of your silo. Here, CBS Beton meets the strictest standards.
When choosing your new silo, it is very important to check both the axle load and the edge clearance. The use of tandem and tridem combinations requires a special calculation. If you want to drive these machines to the edge, it is best to contact our engineering office.
An edge distance of 0 cm!
Our silo walls are designed so you can be drive right up to the edge. This allows the entire width of the silo to be used to compact the silage. This is the best way to preserve your silage.
TYPES OF LIFTING HOOKS
The following lifting hooks are required to move the walls.
See technical sheet for lifting hooks needed for different types of walls.
- Ball head anchors (1) = KKA
- HBS RD24
PVC BATTENS
PVC battens of 3 cm are placed between the walls. Advantages are: they will not crack or splinter, in addition, the battens do not absorb moisture and cannot rot. They retain their mechanical properties at temperatures between -18 and + 50 degrees Celsius.
To use less Sikaflex, foam joints are also placed between the high walls to reduce the cost.
SEALING
SIKAFLEX
For walls placed side by side, we apply a Sikaflex joint sealant with a filler gun. The installer applies Sikaflex to each side of the wall to create a strong joint. This is called sealant.
CBS Beton can supply the backfill strips, foam joints, joint gun and Sikaf- lex joint sealant.
